Items Comparison
SMART OIL PRODUCT: Other Additives
Brands Chemistry Product Features Typical Properties
SGVIS
40℃
cSt
VIS
100℃
cSt
Flash
PT
COC
Smart Base CC8180Chlorine ScavengerHigh viscous fatty acid derivative used as chlorine scavenger. Mainly for use in formulations of high-chlorine cutting and forming oils. Can react with free chlorine in the cutting oil systems to eliminate rust threat from chlorine. With anti-corrosion function, so can be used as rust inhibitor in the finished products.0.900
-
1.000
140 - 180NA> 260
SmartSed 8958Metal Debris Sedimenting AdditivesCationic types, contains high molecular polymer with chlorine. Possesses lubricating, defoaming, tramp oil rejecting, and metal sedimentary properties. Specially designed for synthetic coolant formulations. Can chelate metal powders for settlement to bottom of the oil tank; so can keep the coolant clean and extend replenishment cycle. With defoaming property, can avoid lowering of cooling performance, or shortening of tool life, due to metal powders wrapped by the foam form. Help to lower treatment of biocide in formulations. Can be used together with IPBC type fungicide, with significant effect. Relatively wide pH tolerance range; can be used in acidic and alkaline systems.1.100
-
1.200
120 - 180NANA
MistQuer M1000Anti-mist AdditiveHigh molecular weight polymeric additive, can be used to prevent the formation of very fine droplets, so can reduce mist. Low treat rate (like 10 ppm); can effectively increase the tackiness of metal working fluids, leading to the extended average diameter of the mist droplets. Larger particles can reduce the quantity of particles formed in air, so can shorten the distance from machining operation that the particles will fall.0.900
-
0.930
NA3000 - 5000≥ 170
MistQuer W3000Anti-mist AdditiveWater soluble EO/PO block co-polymer. Can lower the surface tension of metal working fluids, so can reduce the mist from fluid splash and foaming. Belong to low-foaming non-ionic surfactant, possesses good wetting and dispersing characteristics, and also can act as defoamer in water-based systems. Recommended dosage is 3-8% based on different formulation recipes.1.000
-
1.100
NA2000 - 3000≥ 220