| Appearance | Clear Amber Fluid |
| Specific Gravity@60/60℉ | 1.090 |
| Density, lb/gal | 9.08 |
| Viscosity@100℉,SUS(cSt) | 1500 (325) |
| Phosphorus Content,%wt | 1.2 |
| pH Value, Neat(5%Concentration) | 8.2 (8.0) |
| Acid Value, meqKOH/g | 72 |
| Total Alkalinity, meqKOH/g | 7.5 |
MAYLUBE S-830 is a synthetic E.P. and boundary lubricity agent designed to improve performance and finish on both ferrous and non-ferrous alloys . MAYLUBE S-830 contains no chlorinated or sulfurized materials.
MAYLUBE S-830 is a water soluble compound that produces transparent solutions in all dilutions and can be added directly to most semi-synthetic and synthetic fluid formulations (5 - 15% treat). However, MAYLUBE S-830 is not compatible with total oil rejecting synthetics.
MAYLUBE S-830 can also be used as a sump side additive for enhanced performance. A recommended treat would be 1 - 2 gallons per 100 gallons coolant sump. MAYLUBE S-830 can be used in drawing operations that require an oil free, easily removed residual film (20 - 45% treat). Success has been seen in non-ferrous through stainless applications.
MAYLUBE S-830 has replaced highly chlorinated drawing compounds in some of these areas.
MAYLUBE S-830 has a synergistic effect in cutting applications with MAYLUBE S-003, at an approximately 1: 1 ratio. Total treat levels recommended would be 5% for light duty machining to 30% for tapping operations.
| Applications | Suggested Treat Rates, %wt |
| Sump Side Booster | 1 - 2 |
| Light Duty Cutting Oils | 5 |
| Semi-Synthetic | 5 - 15 |
| Synthetic | 5 - 15 |
| Tapping | 20 |
| Drawing | 20 - 45 |
| Net Weight/Gross Weight, kg | 218.0 / 235.0 |