| Brands | Chemistry | Product Features | Typical Properties | |||||
|---|---|---|---|---|---|---|---|---|
| Sulfur Content %wt | Color (APHA) | Flash Pt. ℃ (Close Cup) | pH | Copper Corr. 100% 98℃,4h | Viscosity @20℃ ,mPa.s | |||
| SPS 10LS | Extreme Pressure Lubricant Additive | No signaficant odour, water-soluble, EP additive containing contains non-active sulfur. will notstain copper and aluminum. Soluble in all proportions with water, and is stable at full alkaline pH. Recommended for hydraulic fluids, synthetic and semi-synthetic metal working fluids. Can elevate EP properties of product. More superior effect can be attained when working with anti-wear additives. Treat rates depend upon individual formulations, but 5-20% immediately give outstanding performance. Not easy to cause foaming problem when used with synthetic or semi-synthetic fluids. Good stability and compatibility with other additives, and the metal working fluid can be stored for over 12 months without degradation when there is no bateria proliferation. | 9.5 - 10.5 | ≤ 50 | > 110 | > 7 | 1b | 2.22 |