| Brands | Chemistry | Product Features | Typical Properties | |||
|---|---|---|---|---|---|---|
| SG | pH Con | pH 5%Dil (Water) | Residue Film Layer | |||
| SmartClean SC100 | Multipurpose Cleaner Concentrate | Can remove cutting fluid residue and oil film on tools and mechinery parts. Specially good performance; yet not easily stain ferrous and yellow metals after cleaning. Leave a antirust thin film on surfaces of workpieces and cutting tools after cleaning, so have short term rust preventive property. Better performance can be achieved when heated or under ultra-sound condition. | 1.000 - 1.100 | 10 - 13 | 10 - 12 | Non-Sticky |
| SmartClean SC100PF | Non-Phosphous Containing Cleaner Conc. | Low foam cleaner. Contain no phosphate compound, has outstanding cleansing power. Product blended with antirust additives, it has the shortterm antirust property. Cleansing capability can be more outperforming when washing is in warm water. | 1.000 - 1.100 | 10 - 14 | 10 - 12 | Non-Sticky |
| SmartClean SC400 | Medium Alkaline Cleaner Concentrate for Parts | Suitable for high pressure spray operations. Contains corrosion inhibitors against copper and aluminum; so suitable for cleaning ferrous and yellow metals. Oil water separation is easy after cleaning, so convenient to remove oil sludge. Better performance can be achieved at temperature about 50℃. | 1.000 - 1.100 | 10 - 13 | 10 - 12 | Non-Sticky |
| SmartClean SC700 | High Alkaline Cleaner Concentrate For Parts | Strong oil sludge and greasy dirt remover agent. Can effectively remove fluid residuals and oil films from tools and machinery parts; can be used as general scouring agent in factory. Contains no rust preventve, rust prevention procedure on workpieces needed immediately after cleaning. | 1.000 - 1.100 | 10 - 14 | 10 - 12.3 | Non-Sticky |
| SmartClean SC900 New | Phosphous Containing Cleaner | Contains phosphate ester, strong cleansing power, can remove residual cutting fluid and oil film from cutting tools and mechanical parts, but not easy to corrode iron and yellow metals during cleaning. A layer of anti-corrosion film can be left on the surface of the workpiece and tools after cleaning, so with short-term protective function. Even better effect when used under heating or ultrasonic vibration conditions; Product must be diluted prier usage. | 1.000 - 1.100 | 9.0 - 11.0 | 9.2 - 10.8 | Non-Sticky |